Single Zone Standard Output Kit - covers 10m² - 100m²

Standard Output Water Underfloor Heating Kit with Grundfos Pump Temperature Mix Unit

We supply 16mm 5 multilayer pipe which can be laid to suit Standard or High Output. For Standard Output lay pipes with approx 25cm spacing, which will give you 115w per square metre. For High Output, lay pipes with approx 20cm spacing, which will give you 125w per square metre.

100m pipe length will cover Standard Output up to 30m² and High Output up to 25m² kits.

What included in the kit:

• Grundfos UPM3 Pump ('A' rated, latest model) with Temperature Control Mixing Unit.

• 16mm - 5 Multilayers Pipe (which can be cut to size)

• Edge insulation to be used around the edge of room.

• Pipe Cutter.

• Pipe Staple Clips, compatible with tracker gun or use manually to clip.

Use the table to see what is included in your kit

Key Features 

Supplied pre-mounted on installation brackets

Connections are euroconus and a range of fittings are available to suit most UK pipe sizes

Usual working temperature 82 C

Max working temperature 105 C

Max working pressure 3 bar

Max test pressure 10 bar

Easy Fitting

Manufactured to highest standards to meet all UK and EU standards

Pump Pack - Grundfos Pump with Mixer Blending Valve 

Grundfos A-rated Pump UPM3

Mixer Set Blending Valve

Thermostatic control the flow temperature of water to the underfloor heating pipe.

Temperature range: 35C - 65C

Compression type connections for ease of installation