10mm Underfloor Heating XPS Insulation *Foam* Board (1200mm x 600mm)

XPS insulation boards are designed specifically for use with electric underfloor heating systems, very high compressive strength (30 tonnes / m2), lightweight, high efficiency and low cost make this thermal board an ideal choice when fitting heating on to a poorly insulated concrete or screed base and works excellently with underfloor heating underwood and under tile systems. Insulation boards come with a 50-year warranty.

Photo is for illustration only, Colour may be various.

This is XPS *Foam* Boards, NOT Screed/Cement based Boards (Tile Backer Boards link->).

Dimensions

The dimensions of each board are 0.72m2 (20mm x 1200mm x 600mm)

How many boards do you need to cover your room?

 Room Length (metres), multiple by room width (metres) = total room size in square metres

 Take room square metres and divide by 0.72 (square metre of insulation board) = the number of boards required.

See example below;

Room length - 10 metres

Room width - 10 metres

Total room square metre size = 100 square metres

100 / 0.72 = 139 insulation boards required

Always add an additional 2 - 5 boards when ordering, to ensure all floor space is covered.

 Click Heat Mat Installation Video to watch how to lay our XPS boards, Heatmats and Thermostats 

Advantages

• Good bonding properties
• Lightweight and strong
  
• User friendly

Installation & Fitting

All our products can be installed by a competent DIY'er.

Please ensure that any works that are required by legislation to be carried out by a qualified/authorised person, are carried out by such a tradesperson.

 Click Heat Mat Installation Video to watch how to lay our XPS boards, Heatmats and Thermostats